| |
FIRMWARE UPDATES FOR HYPERION EOS CHARGERS
NOTE: Firmware upgrades have
the potential to make your charger inoperable. Chargers which are
made inoperable due to firmware updates by users are NOT covered by warranty
replacement policy.
(however, they can be traded in for a new charger at
45% discount from original suggested retail price)
If you have ANY RESERVATIONS
about your ability to do the firmware upgrade, or are unwilling to
accept full responsibility for the results:
1) Don’t do the update, OR
2) CONTACT YOUR DEALER to ask about having it done for you.
Most dealers should offer the service at a very small labor charge
plus return shipping charges.
Again, the updates are OPTIONAL and ADD FEATURES. They are NOT
required, and we will NOT replace your charger for free if there is
a problem after update.
BE SURE THAT YOU DOWNLOAD THE CORRECT FIRMWARE VERSION
TO MATCH YOUR CHARGER!!
FIRST
DOWNLOAD
and READ the FIRMWARE UPDATE
MANUAL HERE (Updated OCT 3, 2009)
Please read the manual BEFORE beginning updates! Manual applies to all
version NET and DUO Chargers and was REVISED on Oct 3 2009. It covers the
new firmware update utility included in each firmware ZIP file, so
be sure to read it!
------
UPDATES FOR v3 Series CHARGERS
CURRENTLY IN PRODUCTION -----
DOWNLOAD 0720i
NET3 v3.20 Firmware - Release date
OCT 3 2009
This is the firmware for 0720iNET3
only.
DOWNLOAD
0615i DUO3
v3.20 Firmware - Release date
OCT 3 2009
This is the firmware for 0615iDUO3
only.
v3.2
(the first fw update release for hardware v3 NET & DUO)
* Added Terminal Voltage Control Function (TVC). You MUST read
this EXPLANATION before
using TVC!!
* Changed Cooling Fan control such that the fan is stays on if case temp
exceeds 45C, until falling below 40C.
NOTE:
EOS Insight
Logging Software must be
version 1.5.0.46 or later if using v3.2 NET/DUO firmware.
FIRMWARE FOR CHARGERS NO LONGER IN PRODUCTION
(note again that there is NO guarantee if update fails)
for EOS v2 Series 0712i-NET and 0610i-DUO2
DOWNLOAD 0720i
NET v3.20 Firmware - Release
date OCT 3 2009
DOWNLOAD 0610i DUO2
v3.20 Firmware - Release date OCT 3 2009
(this is for DUO2 ONLY, NOT FOR original
DUO, nor DUO3!)
v3.2
* Added Terminal Voltage Control Function (TVC). You MUST read
this EXPLANATION before using TVC!!
* Changed Cooling Fan control such that the fan is stays on if case temp
exceeds 45C, until falling below 40C.
* Increased Memory Slots per port to 20 (from 10, originally)
NOTE:
EOS Insight
Logging Software must be
version 1.5.0.46 or later if using v3.2 NET/DUO firmware.
v1.2
*
Added LIPO MAX C
setting under USER SETUP. Choices 1C~5C in 1C steps
* Modified FAN ON/OFF control to increase cooling under certain
circumstances
for EOS v1 Series 0610i-NET and 0610i-DUO
(totally optional update to add features. Do not install unless
accepting FULL responsibility)
DOWNLOAD 0610i NET v2.3 Firmware
DOWNLOAD 0610i DUO v2.3 Firmware
(this is for ORIGINAL DUO ONLY, NOT FOR DUO2!)
v2.3
* Increased Memory Slots per port to 20 (from 10, originally)
* Changed Cooling Fan control such that the fan is always on if case temp
exceeds 45C.
ALSO SEE
NET/DUO v2.0 MANUAL ADDENDUM and Firmware Details
All rights reserved Hyperion, HK |