---------------------------------------------------------------------
Release notes for: Hyperion Emeter II Suite version 2.2.3485.27111
---------------------------------------------------------------------

New features: 

 - Added possibility for a overlay graph view, you can choose a second
   session to overlay the one you look at. (2 files or more must be
   loaded to make it enabled), right-click on the graph to access this
   menu-option.

 - Added "Cut" function in the Log Table view tab so you can cut
   away parts that you don’t want.

 - Added possibility to recalculate RPM if your recording have an
   incorrect magnet count/gear ratio and save it back to the file.
   Information about magnet count for all the Hyperion motors are
   located in the Manual found under the Help menu. It is in the
   "Configuring the RDU" section located under "Working with the RDU".

 - Added cross-hair with values showing in upper right corner ,
   right click on graph for this menu option.

 - Added Min/Max/Avg values in the graph as a comment.

 - Min/Max/avg is reflected by the visible area when you zoom on
   the graph.

 - Added showing mAh per minute if you zoom in on the graph, it will
   sample the mAh/minute depending on the current zoomed selection.

 - Added possibility to scale each axis manually under the
   configuration screen

 - Added so it will preset the scale in the settings window to
   whatever it’s default loaded when it loading the graph.

 - Supporting Emeter II and RDU firmware versions up to 2.11

 - Added possibility to clear out all sessions without restarting the
   program.

 - Added feature to resample the time parameter of a session. This is
   especially useful when comparing sessions using overlay and when
   trimming a session using either the "Cut" and "Delete" functions or
   the "Create new Session based on selection" function.


Interface changes:

 - Changed the interface layout to maximize graph area and at the same
   time fit on very small screens (e.g. the very popular netbooks).

 - Session detail (comment, name etc) is hidden until a session
   is loaded or a session is created in live mode.

 - You can select to hide Live view until RDU unit is detected as
   "connected".


Bugs fixed:

 - Updated file reading routines so it support files that have been
   slightly modified with external programs.

 - Reading/Writing configuration to the RDU now works correctly (Number
   of magnets was incorrectly saved as double the intended value,
   please use the new feature to recalculate RPM, if you have used the
   Phase Tachometer with an incorrect setting).

 - The program should now exit more gracefully and don't hang on in
   the process list.

 - Trying to load an erroneous file will not render a crash but rather
   an error-message.

 - Optimized session switching and list updates (e.g. when deleting
   samples).

---------------------------------------------------------------------
Release notes for: Hyperion Emeter II Suite version 2.1.3345.28357
---------------------------------------------------------------------

New features: 

 - Time stamp interpolation for 4Hz and 2Hz logging, so that samples
   are correctly positioned on the graph.

 - Added selection of value sets like Voltage, Amperage, RPM etc.
   for the X-Axis.

 - Graph settings are now saved after closing the application

 - Help file created with instructions and troubleshooting

 - Program icon for the Application, Shortcuts and in Add/Remove
   programs

 - Added "Update port list" option to the status bar port selection
   menu, that refreshes the list of available ports.

 - Added feature to reset the defaults for RDU settings.

Bugs fixed:

 - Fixed crash at application start if no COM ports are present on
   the system

 - Changed some of the captions to follow the normally used terms
   (e.g. Amperage instead of "Current", and Wattage instead of "Effect")

 - Other smaller spelling mistakes corrected.

 - Auto update Feature is now properly disabled when the checkbox is cleared.

 - Formatting of values like Height in the Live View has been changed
   to only display significant digits.

 - Fixed display issues when running under Asian-language Windows versions